Command Reference Guide

160 ● reset dlsw tcp 3Com Router 5000 Family and Router 6000 Family
Command Reference
reset dlsw tcp
Purpose Use the reset dlsw tcp command to reestablish or delete all connection to all the
remote peers.
Use the
reset dlsw tcp ip-address command to reestablish a TCP
connection or delete the connection to the specified remote peer.
Syntax reset dlsw tcp [ ip-address ]
Parameters ip-address
IP address of the remote peer.
Example Specify to reestablish the TCP connections to the remote peers.
<3Com > debugging dlsw tcp
<3Com > reset dlsw tcp
DLSw_TCP 4.4.4.2:The remote peer is learned dynamically ,it will be
deleted
DLSW_TCP 4.4.4.3 : rebulid tcp with the peer
<3Com > reset dlsw tcp 255.255.255.255
Error: Invaild IP address
<3Com > reset dlsw tcp 1.1.1.2
Error: No specified peer is found
View This command can be used in the following views:
■ User view
Description If a remote peer is learned dynamically by DLSw, this command deletes the remote
peer. If the specified remote peer is configured statically, this command reestablishes
the TCP connection to the remote peer.
Table 31 Description on the fields of the reset dlsw tcp command
Field Description
DLSw_TCP 4.4.4.2:The
remote peer is learned
dynamically ,it will be
deleted
The remote peer 4.4.4.2 is leaned dynamically and therefore is
deleted by DLSw.
DLSW_TCP 4.4.4.3 :
rebulid tcp with the peer
The TCP connection to remote peer 4.4.4.3 is reestablished.
Error: Invaild IP address You have entered an invalid IP address.
Error: No specified peer
is found
The specified peer does not exist.