Command Reference Guide

156 ● reset dlsw circuits 3Com Router 5000 Family and Router 6000 Family
Command Reference
reset dlsw circuits
Purpose Use the reset dlsw circuits command to clear the DLSw virtual circuit
information.
Syntax reset dlsw circuits [ circuit-id ]
Parameters circuit-id
The virtual circuit ID of DLSw. Valid values are 0 to
FFFFFFFF.
Example Clear the virtual circuit information with the virtual circuit number of 100.
<3Com > reset dlsw circuits 100
View This command can be used in the following views:
■ User view
Description CAUTION: Use this command with caution; it can disconnect circuits.