Command Reference Guide

152 ● ping ipx 3Com Router 5000 Family and Router 6000 Family
Command Reference
ping ipx
Purpose Use the ping ipx command to check host reachability and network connectivity in
IPX network.
Syntax ping ipx network.node [ -c count ] [ -t timeout ] [ -s size ]
Parameters network.node
Ping destination address. The parameter network can
be an eight-bit hexadecimal number ranging from 0x1
to 0xFFFFFFFD. The 0s in front can be omitted when
inputting. The parameter
node is a 48-bit value
represented by a triplet of four-digit hexadecimal
numbers separated by “-“.
The 0s in front of node value cannot be omitted.
count
Number of Ping packets that are sent.
By default, the value is 5.
timeout
The time waiting for Ping response.
By default, the value is 2 seconds.
size
Ping packet size. By default, the value is 100 bytes.
Example Ping system whose destination address is 675.0000-a0b0-fefe with default
parameters.
<3Com > ping ipx 675.0000-a0b0-fefe
View This command can be used in the following views:
■ Any view