Command Reference Guide

150 ● map clns 3Com Router 5000 Family and Router 6000 Family
Command Reference
map clns
Purpose Use the map clns command to create a CLNSOA mapping for a PVC.
Use the undo map clns command to remove existing CLNSOA mapping.
Syntax map clns
undo map clns
Parameters None
Default No CLNSOA mapping is established by default.
Example Create a static mapping on PVC 1/32.
[3Com -atm-pvc-Atm1/0/0-1/32] map clns
View This command can be used in the following views:
■ ATM PVC view
Description You can configure only one CLNS mapping for a virtual circuit on a
point-to-multipoint interface. So you must remove the existing one before you create
another map on the same interface.