Command Reference Guide

148 ● llc2 timer poll 3Com Router 5000 Family and Router 6000 Family
Command Reference
llc2 timer poll
Purpose Use the llc2 timer poll command to configure the P/F waiting time of the
LLC2.
Use the undo llc2 timer poll command to restore the default value of the
LLC2 P/F waiting time.
Syntax llc2 timer poll mseconds
undo llc2 timer poll
Parameters mseconds
LLC2 P/F waiting time. Valid values are 1 to 60000ms.
If no value is specified, the default LLC2 P/F waiting
time is 5000ms.
Example Configure the LLC2 P/F waiting time as 2000ms.
[3Com -Ethernet1/0/0] llc2 timer poll 2000
View This command can be used in the following views:
■ Ethernet Interface view
Description The LLC2 P/F waiting time refers to the time of waiting for the acknowledgement
frame after the frame P is sent.