Command Reference Guide

144 ● llc2 receive-window 3Com Router 5000 Family and Router 6000 Family
Command Reference
llc2 receive-window
Purpose Use the llc2 receive-window command to configure the maximum packets that
can be sent before the LLC2 receives the acknowledgement frame.
Use the undo llc2 receive-window command to restore the default value of
the maximum packets that can be sent before the acknowledgement frame is
received.
Syntax llc2 receive-window length
undo llc2 receive-window
Parameters length
Length of the local response window. Valid values are
1 to 127.
If not specified, the default length of the LLC2 local
response window is 7.
Example Configure the maximum packets that can be sent before the LLC2 receives the
acknowledgement frame as 10.
[3Com -Ethernet1/0/0] llc2 receive-window 10
View This command can be used in the following views:
■ Ethernet Interface view
Description The LLC2 local response window refers to the maximum packets that can be sent
continuously before the acknowledgement frame is received.