Command Reference Guide

142 ● llc2 max-transmission 3Com Router 5000 Family and Router 6000 Family
Command Reference
llc2 max-transmission
Purpose Use the llc2 max-transmission command to configure the retransmission
times of the LLC2.
Use the undo llc2 max-transmission command to restore the default
retransmission times of the LLC2.
Syntax llc2 max-transmission retries
undo llc2 max-transmission
Parameters retries
LLC2 retransmission times. Valid values are 1 to 255.
If no value is specified, the default number of
transmission retries of the LLC2 is 3.
Example Set the number of transmission retries of the LLC2 to 10.
[3Com -Ethernet1/0/0] llc2 max-transmission 10
View This command can be used in the following views:
■ Ethernet Interface view
Description The LLC2 retransmission times refers to the times of resending information frames
before the acknowledgement frame is received from the peer end.