Command Reference Guide

136 ● ipx tick 3Com Router 5000 Family and Router 6000 Family
Command Reference
ipx tick
Purpose Use the ipx tick command to configure the delay of interface sending IPX
packets.
Use the undo ipx tick command to restore the default value of interface delay.
Syntax ipx tick ticks
undo ipx tick
Parameters ticks
Delay time (in ticks) Valid values are 0 to 30000. One
tick is 1/18 second (approximately 55 ms).
If no value is specified, the default delay of Ethernet
interface is 1 tick; the default delay of the
asynchronous serial port is 30 ticks; and the default
delay of WAN port is 6 ticks.
Example Configure the delay is 5 ticks on the interface Ethernet1/0/0.
[3Com -Ethernet1/0/0] ipx tick 5
View This command can be used in the following views:
■ Interface view
Description As the IPX RIP delay field, the delay value configured by the ipx tick command is a
basis for the optimal routing selection.