Command Reference Guide

130 ● ipx sap mtu 3Com Router 5000 Family and Router 6000 Family
Command Reference
ipx sap mtu
Purpose Use the ipx sap mtu command to configure the maximum size of SAP updating
packet.
Use the undo ipx sap mtu command to restore the default configuration.
Syntax ipx sap mtu bytes
undo ipx sap mtu
Parameters bytes
The maximum SAP packet size (in bytes). Valid values
are 480 to 1500.
If no value is specified, the default value is 480.
Default By default, the maximum size of SAP updating packet is 480 bytes. The size of IPX
header and SAP header is 32 bytes, so a 480-byte SAP updating packet contains 7
service information items (64 bytes each).
Example Set the maximum size of SAP updating packet on the interface Ethernet1/0/0 to 674
bytes (carrying 10 service information items at most).
[3Com -Ethernet0/0/0] ipx sap mtu 674
View This command can be used in the following views:
■ Interface view