Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ipx sap max-reserve-servers ● 129
Command Reference
ipx sap max-reserve-servers
Purpose Use the ipx sap max-reserve-servers command to configure the length of
the service information reserve queue.
Use the undo ipx sap max-reserve-servers command to restore the default
configuration.
Syntax ipx sap max-reserve-servers length
undo ipx sap max-reserve-servers
Parameters length
The length of the dynamic service information reserve
queue. Valid values are 1 to 2048.
If not specified, the default value is 2048.
Example Set the maximum length of service information reserve queue to 1024.
[3Com ] ipx sap max-reserve-servers 1024
View This command can be used in the following views:
■ System view
Description If the newly configured service information queue length is less than the present one,
the items in SIT will not be deleted. If the service information item number for the
same service type exceeds the maximum value configured, the new service
information will not be added.