Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ipx route max-reserve-path ● 123
Command Reference
ipx route max-reserve-path
Purpose Use the ipx route max-reserve-path command to configure the maximum
dynamic route number to the same destination address.
Use the undo ipx route max-reserve-path command to restore the default
configuration.
Syntax ipx route max-reserve-path paths
undo ipx route max-reserve-path
Parameters paths
The maximum dynamic route number to the same
destination address. Valid values are 1 to 255.
If not specified, the default value is 4.
Example Configure the maximum dynamic route number to the same destination address to
200.
[3Com ] ipx route max-reserve-path 200
View This command can be used in the following views:
■ System view
Description When the dynamic route number to the same destination address exceeds the
maximum value configured, the newly found dynamic routes will not be added into
the routing table, discarded directly. If the newly configured value is less than the
original one, the excessive routes in the current routing table will not be deleted until
they get aging themselves or are deleted manually.