Command Reference Guide

122 ● ipx route load-balance-path 3Com Router 5000 Family and Router 6000 Family
Command Reference
ipx route load-balance-path
Purpose Use the ipx route load-balance-path command to configure the equivalent
route number to the same destination address.
Use the undo ipx route load-balance-path command to restore the default
configuration.
Syntax ipx route load-balance-path paths
undo ipx route load-balance-path
Parameters paths
The maximum equivalent route number to the same
destination address. Valid values are 1 to 64.
If not specified, the default value is 1.
Example Configure the equivalent route number to the same destination address to 30.
[3Com ] ipx route load-balance-path 30
View This command can be used in the following views:
■ System view
Description The equivalent route number to the same destination address is the maximum
number of active equivalent routes in the current system. If the newly configured
value is less than the current active route number, the system will change the
excessive active routes to inactive status.