Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ipx network ● 117
Command Reference
ipx network
Purpose Use the ipx network command to configure a network ID for an interface.
Use the undo ipx network command to delete IPX network ID of an interface.
Syntax ipx network network
undo ipx network
Parameters network
Network ID of IPX interface in hex. Valid values are 0x1
to FFFFFFFD.
Default By default, IPX is disabled on all interfaces after it is activated. There is no IPX network
ID on the interface.
Example Configure the interface Ethernet0/1/0 as IPX interface and assign it with a network ID.
[3Com -Ethernet 0/1/0] ipx network 675
Cancel the configuration of the interface Ethernet0/1/0 as IPX interface.
[3Com -Ethernet 0/1/0] undo ipx network
View This command can be used in the following views:
■ Interface view