Command Reference Guide

116 ● ipx netbios-propagation 3Com Router 5000 Family and Router 6000 Family
Command Reference
ipx netbios-propagation
Purpose Use the ipx netbios-propagation command to configure the router to
forward type 20 broadcast packets on the current interface.
Use the undo ipx netbios-propagation command to disable the forwarding
of type 20 packets.
Syntax ipx netbios-propagation
undo ipx netbios-propagation
Parameters None
Default By default, type 20 broadcast packets will be discarded by the router rather than
forwarded.
Example Enable the receipt and forwarding of type 20 broadcast packets.
[3Com -Ethernet 0/1/0] ipx netbios-propagation
Disable the receipt and forwarding of type 20 broadcast packets.
[3Com -Ethernet 0/1/0] undo ipx netbios-propagation
View This command can be used in the following views:
■ Interface view
Description IPX type 20 packet is a packet for NetBIOS (Network Basic Input/Output System)
defined by Novell NetWare.