Command Reference Guide

3Com Router 5000 Family and Router 6000 Family esis enable ● 111
Command Reference
esis enable
Purpose Use the esis enable command to employ ES-IS protocol on the interface.
Use the undo esis enable command to disable ES-IS protocol on the interface.
Syntax esis enable
undo esis enable
Parameters None
Default ES-IS protocol is not employed on an interface by default.
Example Employ ES-IS protocol on Ethernet0/0/0 interface.
<3Com > system-view
System View: return to User View with Ctrl+Z.
[3Com ] interface ethernet0/0/0
[3Com -Ethernet0/0/0] esis enable
View This command can be used in the following views:
■ Interface view