Command Reference Guide

110 ● esis 3Com Router 5000 Family and Router 6000 Family
Command Reference
esis
Purpose Use the esis command to employ ES-IS protocol globally and enter ES-IS view.
Use the undo esis command to disable ES-IS protocol.
Syntax esis
undo esis
Parameters None
Default ES-IS protocol is not employed by default.
Example Employ ES-IS protocol globally.
<3Com > system-view
System View: return to User View with Ctrl+Z.
[3Com ] esis
[3Com -esis]
View This command can be used in the following views:
■ System view