Command Reference Guide

264 ● pos-server app x25 3Com Router 5000 Family and Router 6000 Family
Command Reference
pos-server app x25
Purpose Use the pos-server app x25 command to configure the specified POS
application on the POSPAD client router.
Use the undo pos-server app x25 command to remove the specified POSPAD
client application.
Syntax pos-server app x25 appid x121-address
undo pos-server app x25 appid
Parameters app-id
Number of a POS application. Valid values are 0 to 31.
x121-address
X.121 address of the POSPAD server corresponding to
the POS application.
Default By default, no POSPAD client application is configured.
Example Associate POSPAD client application 1 with the peer x121 address of 12345.
[Router] pos-server app x25 1 12345
View This command can be used in the following views:
■ System view
Description The POSPAD client sends the POS packets of the specified application to the POSPAD
server with the specified x121 address, and receives responses from that address.
When configuring an application, ensure that the serial interface on the router works
in X.25 PAD mode and the PAD is available.
The POSPAD client does not support PAD multi-application mapping, so only one
client application needs to be configured.