Command Reference Guide

104 ● dlsw reachable-cache 3Com Router 5000 Family and Router 6000 Family
Command Reference
dlsw reachable-cache
Purpose Use the dlsw reachable-cache command to add the reachability information of
the specified SNA device to the reachable-cache. You can specify this SNA device by
specifying its MAC address and IP address of the router to which it is connected.
Use the undo dlsw reachable-cache command to remove the configured
reachability information.
Syntax dlsw reachable-cache mac-address remote ip-address
undo dlsw reachable-cache mac-address remote ip-address
Parameters mac-address
MAC address of the SNA device connected to the peer
router.
ip-address
IP address of the peer router.
Example Add a reachability entry to the reachable-cache, where the remote IP address is
10.12.13.10 and the MAC address of the connected SNA device is 0102-2103-5641.
[Router] dlsw reachable-cache 0102-2103-5641 remote 10.12.13.10
View This command can be used in the following views:
■ System view
Description This configuration allows the router to send packets without exploring. If the remote
network is prone to changes however, this configuration is unreliable.