Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dlsw filter acl ● 97
Command Reference
dlsw filter acl
Purpose Use the dlsw filter acl command to specify to filter packets from any peer.
Use the
undo dlsw filter acl command to disable filtering of packets from
peers.
Syntax dlsw filter acl acl-number
undo dlsw filter acl acl-number
Parameters acl acl-num
Specifies the ACL for filtering packets from the peers.
The ACL number must be in the range from 4000 to
4999.
Example Specify to use ACL 4000 to filter packets from all peers, including those learned
dynamically. That is, permit only packets with a MAC address of 3-2-3 to pass
through.
[Router] acl number 4000
[3Com -acl-ethernetframe-4000] rule 3 permit source-mac 0003-0002-0003
ffff-ffff-ffff
[3Com -acl-ethernetframe-4000] quit
[Router] dlsw filter acl 4000
View This command can be used in the following views:
■ System view