Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dlsw bridge-set ● 91
Command Reference
dlsw bridge-set
Purpose Use the dlsw bridge-set command to configure the bridge group to connect
DLSw. Use the
undo dlsw bridge-set command to delete the bridge.
Syntax dlsw bridge-set bridge-set-number
undo dlsw bridge-set bridge-set-number
Parameters bridge-set-number
ID of bridge group, ranging from 1 to 63, local valid.
Example Configure the bridge group connected with DLSw, with the ID of the bridge group
being 20.
[3Com ] dlsw bridge-set 20
View This command can be used in the following views:
■ System view
Description In order to forward packets of specified bridge group to the remote end through the
TCP connection, a local bridge group needs to be connected with DLSw by using this
command, that is, packets of the local bridge group can be sent to the remote end
through the TCP tunnel. This command can be used many times to connect many
bridge groups with DLSw, and make them all capable of joining the forwarding
through the TCP tunnel.