Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display isis routing clns ● 85
Command Reference
display isis routing clns
Purpose Use the display isis routing clns command to display CLNS routing
information generated by IS-IS protocol.
Syntax display isis routing clns
Parameters None
Example Display CLNS routing information generated by IS-IS protocol.
<3Com > display isis routing clns
ISIS clns Level - 1 Routing Table :
System Id Nexthop SNPA Interface Cost
1111.1111.1111 0000.0000.0001 000e.84ba.fd90 Fa0/0 10
2222.2222.2222 0000.0000.0002 000e.84ba.fd92 Fa0/0 10
#3333.3333.3333 -------------- -------------- ----- 0
# indicates the nearest L2 IS
ISIS clns Level - 2 Routing Table :
NSAP Prefix Nexthop SNPA Interface Cost
49.0001 0000.0000.0001 000e.84ba.fd90 Fa0/0 10
49.0002 0000.0000.0002 000e.84ba.fd92 Fa0/0 10
The information above is the contents of Level 1 and Level 2 routing
table generated by IS-IS protocol. Table 28 describes the fields in it.
View This command can be used in the following views:
■ Any view
Table 28 Description on hte fields of the display isis rout clns command
Field Description
System Id System ID
Nexthop The address of the next hop
SNPA SNPA address
Interface The interface that leads to the next hop
Cost The cost of the route
NSAP prefix NSAP prefix