Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display ipx service-table ● 81
Command Reference
display ipx service-table
Purpose Use the display ipx service-table command to view contents of IPX service
information table. The output information of the command helps users with IPX SAP
troubleshooting.
Syntax display ipx service-table [ [ type service-type | name name | network
network | order { network | type } ] | [ inactive ] ] [ verbose ]
Parameters type
Displays information for specified service type ID.
service-type
The type of service.
name
Displays information for specified server name.
name
Name of the server.
network
Displays service information of the server on specified
network segment.
network
The network ID of the network segment.
order
Displays service information after classified by the type.
network
Classified by the network ID.
type
Classified by the service type.
inactive
Displays inactive service information.
verbose
Displays details about service information.
Example Display contents of IPX service information table.
[3Com ] display ipx service-table
Abbreviation: S - Static, Pref - Preference(Decimal), NetId - Network
number,
NodeId - Node address, hop - Hops(Decimal), Recv-If - Interface from
which the service is received
Number of Static Entries: 4
Number of Dynamic Entries: 0
Name Type NetId
S 2 0002 0011
S ser 0002 0002
S 2 0002 0002
S ser1 00ff 0002
Display contents of service information table of type 5.
[3Com ] display ipx service-table type 5
Abbreviation: S - Static, Pref - Preference(Decimal), NetId - Network
number,
NodeId - Node address, hop - Hops(Decimal), Recv-If - Interface from
which the service is received
Name Type NetId NodeId Sock Pref Hops
Recv-If