Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display ipx routing-table ● 77
Command Reference
display ipx routing-table
Purpose Use the display ipx routing-table command to view active IPX routing
information.
Use the
display ipx routing-table verbose command to view detailed IPX
routing information, including active and inactive routes.
Use the
display ipx routing-table network command to view active IPX
routing information to specified destination network ID.
Use the
display ipx routing-table network verbose command to view
detailed IPX routing information to specified destination network ID, including active
and inactive routes.
Use the
display ipx routing-table protocol { rip | static | default | direct
} command to view IPX routing information for specified destination type, including
active and inactive routes.
Use the
display ipx routing-table protocol { rip | static | default | direct }
verbose command to view detailed IPX routing information for specified destination
type, including active and inactive routes.
Syntax display ipx routing-table [ network ] [ verbose ]
display ipx routing-table protocol { default | direct | rip | static }
[ inactive | verbose ]
Parameters network
Destination network ID of IPX static route. Valid values
are any 8-bit hexadecimal number, ranging from 1 to
0xFFFFFFFE. Display IPX routing information to
specified destination network ID.
verbose
Displays detailed route information, including active
and inactive routes.
default
Displays all the default routing information.
direct
Displays all the directly connected routing information.
rip
Displays all IPX RIP routing information.
static
Displays all IPX static routing information.
inactive
Only displays inactive routing information.
Example Display active IPX routing information.
[3Com ] display ipx routing-table
Routing tables:
Summary count: 4
Dest_Ntwk_ID Proto Pre Ticks Hops Nexthop Interface
0x11 Direct 0 6 0 0.0000-0000-0000
Serial0/0/0