Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display esis peer ● 73
Command Reference
display esis peer
Purpose Use the display esis peer command to display information about the
neighbors dynamically discovered by ES-IS protocol (including dynamic ES and IS
neighbors).
Syntax display esis peer
Parameters None
Example Display information about the neighbors dynamically discovered by ES-IS protocol.
<3Com > display esis peer
47.0000.0000.0000.0000
Interface:Fa0/0 SNPA:000e-84ba-fd90 HoldTime:250s Type:ES
47.0000.0000.0000.0000
Interface:Fa0/0 SNPA:000e-84ba-fd91 HoldTime:250s Type:ES
49.0000.0647.0001.1100
Interface:Fa0/0 SNPA:000e-84ba-fd92 HoldTime:300s Type:ES
47.0000.0647.0001.1100
Interface:Fa0/0 SNPA:000e-84ba-fd94 HoldTime:220s Type:IS
47.0000.0647.0001.1101
Interface:Fa0/0 SNPA:000e-84ba-fd94 HoldTime:220s Type:IS
View This command can be used in the following views:
■ Any view