Command Reference Guide

72 ● display esis interface 3Com Router 5000 Family and Router 6000 Family
Command Reference
display esis interface
Purpose Use the display esis interface command to display ES-IS related information
about a specified interface.
Syntax display esis interface [ interface-type interface-number ]
Parameters interface-type
Interface type.
interface-number
Interface number.
Example Display ES-IS related information about an interface.
<3Com > display esis interface Ethernet0/0/0
Ethernet0/0/0 is up
ES-IS protocol status is up
0 packets received, 0 packets sent
0 bytes received, 0 bytes sent
View This command can be used in the following views:
■ Any view
Description If you do not specify the interface-type interface-number argument, this
command display ES-IS related information about all interfaces.
Table 22 Description on the fields of the display esis interface command
Field Description
Ethernet0/0/0 is up The current state of the interface
ES-IS protocol state The ES-IS protocol state of the interface
ES-IS Packets
packets received,
packets sent
bytes received, bytes
sent
The number of ES-IS packets the interface receives and sends and
the corresponding byte number