Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display esis ● 71
Command Reference
display esis
Purpose Use the display esis command to display current ES-IS protocol state, such as the
configuration timer (CT) to send ISH packets, the holding time (HT) of the information
ISH packets carry.
Syntax display esis
Parameters None
Example Display current ES-IS protocol state.
<3Com >display esis
Current ESIS status: Enable
Current ESIS configuration timer: 60s
Current ESIS holding timer: 180s
View This command can be used in the following views:
■ Any view