Command Reference Guide

68 ● display dlsw remote 3Com Router 5000 Family and Router 6000 Family
Command Reference
display dlsw remote
Purpose Use the display dlsw remote command to view the information of the remote
peers.
Syntax display dlsw remote [ ip-address ]
Parameters ip-address
Displays the information of the remote peer with
specified IP address.
Example Display information about all remote DLSw1.0 peers.
<3Com > display dlsw remote
IP addressframe-inframe-outframe-dopstate life-time
* 3.1.1.10 0 0 DISCONNECT00:00:00
View This command can be used in the following views:
■ Any view
Description The output information helps the user to understand the connection state between
the DLSw and the remote peers.
Table 19 Descritption on the fields of the display dlsw remote command
Field Description
* Indicates that the peer can set up connection. If no asterisk sign is
placed before TCP, the peer is an inactive standby peer.
IP address IP address of the peer.
frame-in Packets received by the peer.
frame-out Packets sent by the peer.
frame-drop Packets dropped by the peer.
State State of the peer.
life-time Duration of the connection.