Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display dlsw ethernet-backup neighbour ● 67
Command Reference
display dlsw ethernet-backup neighbour
Purpose Use the display dlsw ethernet-backup neighbour command to display all
neighbors of the current router.
Syntax display dlsw ethernet-backup neighbour
Parameters None
Example Display all neighbors of the current router.
<3Com > display dlsw ethernet-backup neighbour
Role Mac-Address Status LLC2-Circuit
Self 00e0.fc2a.0939 Master ----
Neighbor 00e0.fc0f.3448 Slave CONNECT
View This command can be used in the following views:
■ Any view
Table 18 Description on the fields of display dlsw ethernet-backup neighbour
Field Description
Role Self indicates the current router, while Neighbor indicates a
neighbor of the current router.
Mac-Address MAC address of the Ethernet interface on the router
Status Master/slave status of the router, which can be master, slave,
master-pending, slave-pending, or init.
LLC2-Circuit Status of the LLC circuit between the master router and the slave
router, which can be connect, disconnect, or SABMESENT.