Command Reference Guide

62 ● display dlsw information 3Com Router 5000 Family and Router 6000 Family
Command Reference
display dlsw information
Purpose Use the display dlsw information command to display DLSw capability
exchange information. The output of this command can help you understand the
status of DLSw virtual circuits.
Syntax display dlsw information [ local ] [ ip-address ]
Parameters local
Displays the local capability exchange information.
ip-address
Displays the local capability exchange information
about a specified IP address.
Example Display general capability exchange information.
<3Com > display dlsw information
DLSw: Capabilities for peer 14.0.0.1
Vendor ID (OUI): 00000c
Version number: 02
Release number: 00
Init Pacing Window: 40
Num of TCP sessions: 01
Multicast address: None
Version string:
Copyright (c) 2003-2004 3Com Corporation.
Display the local capability exchange information.
<3Com > display dlsw information local
DLSw: Capabilities for peer 12.0.0.1
Vendor ID (OUI): ’00e0fc’ (3Com)
Version number: 2
Release number: 0
Init Pacing Window: 40
Num of TCP sessions: 1
Multicast address: None
Version string:
Copyright (c) 2003-2004 3Com Corporation.
Table 16 Description on the fields of the debugging dlsw udp command
Field Description
Version number Version of RFC 1795
Release number Release of RFC 1795
Init Pacing Window Init window size
Num of TCP sessions Number of TCP sessions
Multicast address Multicast address
Version string Version of the operating system on the router