Command Reference Guide

58 ● display dlsw bridge-entry 3Com Router 5000 Family and Router 6000 Family
Command Reference
display dlsw bridge-entry
Purpose Use the display dlsw bridge-entry command to view the bridge-set
information.
Syntax display dlsw bridge-entry interface-type interface-number
Parameters interface-type
interface-number
Specifies an interface by its type and number.
Example Display the bridge group information.
<3Com > display dlsw bridge-entry
Mac_entry Port group hashIndex
0000.e81c.b6bf Ethernet0/0/0 1 79
View This command can be used in the following views:
■ Any view