Command Reference Guide

52 ● display clns interface 3Com Router 5000 Family and Router 6000 Family
Command Reference
display clns interface
Purpose Use the display clns interface command to display CLNS related information
about a specified interface.
Syntax display clns interface [ interface-type interface-number ]
Parameters interface-type
Interface type.
interface-number
Interface number.
Example <3Com > display clns interface Ethernet 0/0/0
Ethernet0/0/0 is up
CLNP protocol status is up
0 packets received, 0 packets sent
0 bytes received, 0 bytes sent
CLNP redirect packet:
0 packets sent
0 bytes sent
View This command can be used in the following views:
■ Any view
Description If you do not specify the interface-type interface-number argument, this
command displays CLNS related information about all interfaces.
Table 11 Description on the fields of the display clns interface command
Field Description
Ethernet0/0/0 is up The state of Ethernet0/0/0 interface
CLNP protocol state CLNP protocol state of the interface
CLNP Packets
packets received,
packets sent
bytes received, bytes
sent
The number of CLNS packets the interface receives and sends and
the corresponding byte number
CLNP redirect packet Statistics information about CLNP RD packets processed by the
interface
packets sent, bytes sent The number of RD packets the interface receives and sends and the
corresponding byte number