Command Reference Guide

48 ● debugging isis is-adjacency 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging isis is-adjacency
Purpose Use the debugging isis is-adjacency command to enable debugging for
IS-IS protocol-related events occur on neighboring ISs.
Use the undo debugging isis is-adjacency command to disable debugging
for IS-IS protocol-related events occur on neighboring ISs.
Syntax debugging isis is-adjacency
undo debugging isis is-adjacency
Parameters None
Default Debugging for IS-IS protocol-related events occur on neighboring ISs is disabled by
default.
Example Enable debugging for IS-IS protocol-related events occur on neighboring ISs.
<3Com > debugging isis is-adjacency
View This command can be used in the following views:
■ User view
Description You can display information about IS-IS protocol-related events occur on neighboring
ISs by enable this type of debugging, such as state (up/down) changes of the
neighboring ISs, information about receiving/transmitting IIH packets.