Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging clns echo 43
Command Reference
debugging clns echo
Purpose Use the debugging clns echo command to enable debugging for Echo packets.
Use the undo debugging clns echo command to disable debugging for Echo
packets.
Syntax debugging clns echo
undo debugging clns echo
Parameters None
Default Debugging for Echo packets is disabled by default.
Example Enable debugging for Echo packets.
<3Com > debugging clns echo
View This command can be used in the following views:
User view
Description The information displayed includes source and destination addresses, invalid ERQ
packet source addresses, packet type error information and so on.