Command Reference Guide

40 ● debugging ipx sap 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging ipx sap
Purpose Use the debugging ipx sap command to enable IPX SAP debugging switch to
view information on SAP packet received and transmitted, routing changes and timer
expiry.
Use the undo debugging ipx sap command to disable IPX SAP debugging
switch.
Syntax debugging ipx sap [ packet [ verbose ] | event ]
undo debugging ipx sap [ packet [ verbose ] | event ]
Parameters packet
Debugging information of packet received and
transmitted.
verbose
Displays detailed information about packet received
and transmitted.
event
Event debugging information, such as Up/Down of an
interface and related timer events.
Example Enable SAP packet verbose debugging switch.
<3Com > debugging ipx sap packet verbose
*0.20909856-IPXSAP-8-IPX SAP: MSG: Receive Response Packet From
Eth0,Length 480
Src: 000a.0000-0104-8f02 (0452) Dest: 000a.ffff-ffff-ffff (0452)
Number of entries in pkt: 7
Server type 2000 "PS1" 0008.000a-000a-000a (0452) hop 3
Server type 2345 "kkkkk" 000d.0005-0005-0005 (0452) hop 6
Server type 9000 "kiran-temp" 000d.0006-0006-0006 (0452) hop 16
Server type 6000 "kiran3" 000d.0003-0003-0003 (0452) hop 6
Server type 5000 "kiran2" 000d.0002-0002-0002 (0452) hop 16
Server type 4000 "kiran1" 000d.0001-0001-0001 (0452) hop 16
Server type 1000 "FS2" 000d.000a-000a-000a (0452) hop 2
Enable SAP packet debugging switch.
<3Com > debugging ipx sap packet
*0.20909856-IPXSAP-8-IPX SAP : MSG:Recieve Response Packet From
Eth0,Length 480
Src: 000a.0000-0104-8f01 (0452) Dest: 000a.ffff-ffff-ffff (0452)
Number of entries in pkt: 4
Enable SAP event debugging switch.
<3Com > debugging ipx sap Event
*0.20776625-IPXSAP-8-IPX SAP: MSG:
IPXSAP: Route UP Event Received: N