Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging ipx rtpro-routing ● 37
Command Reference
debugging ipx rtpro-routing
Purpose Use the debugging ipx rtpro-routing command to turn on the debugging
switch of route change in the IPXRM module.
Syntax debugging ipx rtpro-routing
undo debugging ipx rtpro-routing
Parameters None
Example Switch on route change debugging for IPXRM module.
<3Com >debugging ipx rtpro-routing
<3Com >
Add a static route
[3Com ]ipx route-static d10 Serial 1
*0.19579120 3Com RMX/8/DBG:
IPXRM ADD route !
Dest: d10 Nexthop: 0.0000-0000-0000
Interface: a.00e0-fcfb-3a00(Serial1)
Protocol: Static Preference: 60
Ticks: 6 Hops: 1
*0.19579230 3Com RMX/8/DBG:
IPXRM route change to ACTIVE !
Dest: d10 Nexthop: 0.0000-0000-0000
Interface: a.00e0-fcfb-3a00(Serial1)
Protocol: Static Preference: 60
Ticks: 6 Hops: 1
View This command can be used in the following views:
■ User view
Description Use the command to turn off the debugging switch of route change in the IPXRM
module.
This kind of debugging information is generated when route changes as addition,
deletion or attribute adjustment occur.