Command Reference Guide

34 ● debugging ipx rtpro-flash 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging ipx rtpro-flash
Purpose Use the debugging ipx rtpro-flash command to turn on the debugging
switch of route refreshing in the IPXRM module.
Syntax debugging ipx rtpro-flash
undo debugging ipx rtpro-flash
Parameters None
Example Switch on route refreshing debugging for IPXRM module.
<3Com >debugging ipx rtpro-flash
<3Com >
Remove an IPX static route.
[3Com ]undo ipx route-static b2 Serial 1
*0.18537610 3Com RMX/8/DBG:
IPXRM set a Rth on the flash list, ulRthDest = 0xb2 .
[3Com ]
*0.18537820 3Com RMX/8/DBG:
IPXRM finish a flash, reset a Rth on the flash list, ulRthDest = 0xb2 .
[3Com ]
View This command can be used in the following views:
■ User view
Description Use the command to turn off the debugging switch of route refreshing in the IPXRM
module.
This kind of debugging information is generated when routes are refreshed for the
sake of route change.