Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging ipx ping ● 33
Command Reference
debugging ipx ping
Purpose Use the debugging ipx ping command to enable IPX Ping packet debugging
switch to view the contents of Ping packet received and transmitted.
Use the undo debugging ipx ping command to disable the debugging switch.
Syntax debugging ipx ping
undo debugging ipx ping
Parameters None
Default By default, IPX Ping packet debugging switch is disabled.
Example Enable IPX Ping packet debugging switch.
<3Com > debugging ipx ping
*0.15396012-IPX-8-IPXPING:
Ping receiving: Request, Src = a.00e0-fc04-8859, Dst = a.00e0-fc01-54f6
*0.15396130-IPX-8-IPXPING:
Ping sending: Response, Src = a.00e0-fc01-54f6, Dst = a.00e0-fc04-8859
View This command can be used in the following views:
■ User view
Table 8 Description of display information of the debugging ipx ping command
Field Description
Src = Source address of Ping packet.
Dst = Destination address of Ping packet.