Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging hdlc clns ● 31
Command Reference
debugging hdlc clns
Purpose Use the debugging hdlc clns command to enable debugging for HDLC OSI
packets.
Use the undo debugging hdlc clns command to disable debugging for HDLC
OSI packets.
Syntax debugging hdlc clns { in | in-out | out } [ interface interface-type
interface-number ]
undo debugging hdlc clns { in | in-out | out } [ interface
interface-type interface-number ]
Parameters in
Specifies to enable debugging for input packets.
in-out
Specifies to enable debugging for input and output
packets.
out
Specifies to enable debugging for output packets.
interface-type
Interface type.
interface-number
Interface number.
Default Debugging for HDLC OSI packets is disabled by default.
Example Enable debugging for input and output HDLC OSI packets.
<3Com > debugging hdlc clns in-out
View This command can be used in the following views:
■ User view
Description CLNP packets, ES-IS packets, and IS-IS packets are all HDLC OSI packets.