Command Reference Guide

26 ● debugging dlsw udp 3Com Router 5000 Family and Router 6000 Family
Command Reference
View This command can be used in the following views:
■ User view
DLSW_UDP: Send UDP
to remote peer
192.168.10.20
Unicasted a UDP packet to the remote peer (192.168.10.20).
DLSW_UDP: Remote
peer’s status is wrong
The remote peer is in a wrong connection state.
DLSW_UDP: The
sending packet is wrong
The packet that needs sending is illegitimate.
DLSW_UDP: Send a
multicast packet to
224.0.10.10
A multicast packet was sent to a multicast address.
DLSW_UDP: No found
UDP socket
No UDP socket was found.
DLSW_UDP: Failed to
allocate memory
Memory allocation failed.
DLSW_UDP: Failed to
send UDP packets to
192.168.10.20
DLSW_UDP: The length
has sent is 70
Failed to send a UDP packet to the remote peer 192.168.10.20. The
part that was sent is 70 bytes.
DLSW_UDP: Succeed in
sending UDP to
192.168.10.20
A UDP unicast packet was sent to the remote peer 192.168.10.20
successfully.
DLSW_UDP: Socket port
is not 2067
The packet was received on a socket port other than 2067.
DLSW_UDP: Receive a
wrong packet
An illegitimate packet was received.
DLSW_UDP: The packet
has not been received
completely
An incomplete packet was received.
DLSW_UDP: Failed to
create a mbuf for EX
packet
The request for MBUF for the EX packet failed.
DLSW_UDP: Failed to
send multicast to
224.0.10.10
DLSW_UDP: The length
has send is 70
Error occurred when DLSw sent a multicast packet to 224.0.10.10;
only 70 bytes were sent.
DLSW_UDP: Succeed in
sending multicast to
224.0.10.10
A multicast packet was sent to 224.0.10.10 successfully.
Table 5 Description on the fields of the debugging dlsw udp command
Field Description