Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging dlsw udp ● 25
Command Reference
debugging dlsw udp
Purpose Use the debugging dlsw udp command to enable UDP packet debugging for
DLSw.
Use the
undo debugging dlsw udp command to disable UDP packet debugging
for DLSw.
Syntax debugging dlsw udp
undo debugging dlsw udp
Parameters None
Example Enable UDP packet debugging for DLSw2.0.
<3Com > debugging dlsw udp
Table 5 Description on the fields of the debugging dlsw udp command
Field Description
DLSw_UDP: Failed to
create udp socket
Failed to create a UDP socket.
DLSw_UDP: Failed to
bind udp socket
Failed to bind the UDP socket.
DLSw_UDP: Failed to
specify udp socket
options
Failed to set attributes for the UDP socket.
DLSW_UDP: Failed to
specify
‘ADD_MEMBERSHIP'
socket option
Failed to set the ADD_MEMBERSHIP attribute for the UDP socket.
DLSW_UDP: Failed to
specify
‘IP_MULTICAST_TTL'
socket option
Failed to set the IP_MULTICAST_TTL attribute for the UDP socket.
DLSW_UDP: Failed to
specify
‘IP_MULTICAST_IF'
socket option
Failed to set the ADD_MEMBERSHIP attribute for the UDP socket.
DLSw_UDP: Failed to
specify ioctl for port
2067 of local peer
192.168.10.1
Failed to set the input/output attribute for the 2067 port on the
local peer 192.168.10.1.
DLSW_UDP: Failed to
create CANUREACH_ex
packet
Error occurred when creating a CANUREACH_ex packet.
DLSW_UDP: Remote
peer(192.168.10.20)'s
sending queue is full
The sending queue of the remote peer 192.168.10.20 is full, and no
packet can be sent.
DLSW_UDP: Local
peer(192.168.10.1)'s
sending queue is full
The sending queue of the local peer 192.168.10.1 is full, and no
packet can be sent.