Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging dlsw packet ● 21
Command Reference
debugging dlsw packet
Purpose Use the debugging dlsw packet command to enable SSP packet debugging for
DLSw.
Use the
undo debugging dlsw packet command to disable SSP packet
debugging for DLSw.
Syntax debugging dlsw packet [ receive [ip-address] | send [ip-address] ]
undo debugging dlsw packet [ receive [ip-address] | send [ip-address] ]
Parameters receive
Enables debugging for inbound SSP packets.
send
Enables debugging for outbound SSP packets.
ip-address
Enables debugging for the SSP packets with the
specified IP address.
Default By default, SSP packet debugging for DLSw is disabled.
Example Enable SSP packet debugging for DLSw.
<3Com > debugging dlsw packet
*0.678357 3C5012A DLSW/8/CIR:
DLSW_PACKET 4.4.4.2 ( TCP Output)
*0.678358 3C5012A DLSW/8/CIR:
04ac1bd9 31 48 00 00 07 00 03 5d 82 d9 63 84 00 00 03 00
04ac1be9 42 01 00 00 88 00 00 03 00 20 35 7b e0 65 00 00
04ac1bf9 17 22 34 35 04 04 01 00 00 00 00 00 00 00 03 82
04ac1c09 00 b7 00 04 00 00 00 00 82 d9 63 84 07 00 03 5d
04ac1c19 82 79 93 3c 00 00 00 00
*0.678372 3C5012A DLSW/8/CIR:
DLSW_PACKET 4.4.4.2 ( TCP Input)
*0.678373 3C5012A DLSW/8/CIR:
04ae1ba3 31 48 00 00 00 b7 00 04 00 00 03 82 04 04 04 80
04ae1bb3 42 01 00 00 08 00 00 04 00 20 35 7b e0 65 00 00
04ae1bc3 17 22 34 35 04 04 02 00 00 00 00 00 00 00 03 82
04ae1bd3 00 b7 00 04 00 00 00 00 82 d9 63 84 3f 00 03 5e
04ae1be3 82 79 93 3c 40 40 00 00
View This command can be used in the following views:
■ User view