Command Reference Guide

20 ● debugging dlsw filter 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging dlsw filter
Purpose Use the debugging dlsw filter command to enable debugging for DLSw
filtering.
Use the
undo debugging dlsw filter command to disable debugging for
DLSw filtering.
Syntax debugging dlsw filter
undo debugging dlsw filter
Parameters None
Example Enable debugging for DLSw filtering.
<Router> debugging dlsw filter
DLSw filter : The packet was discarded by ACL 4000 because of rule 2
Packet Len = 110, the head of the packet as follows:
FF FF FF FF FF FF 00 0F 3D 80 42 F8 08 00 45 00
View This command can be used in the following views:
■ User view
Description After you enable debugging for DLSw filtering, the system will display information
about all packets that are filtered out.
Table 2 Description on the fields of the debugging dlsw filter command
Field Description
ACL 4000 Number of the ACL used for filtering
rule 2 Number of the ACL rule by which the packet is denied
Not found Discarded because no match is found in the ACL
Packet Len = 110 Length of the discarded packet
FF FF….. Header of the discarded packet