Command Reference Guide

3Com Router 5000 Family and Router 6000 Family clns timer rdpacket holding ● 15
Command Reference
clns timer rdpacket holding
Purpose Use the clns timer rdpacket holding command to set the holding time of
the information a RD packet carries.
Use the undo clns timer rdpacket holding command to revert to the
default holding time.
Syntax clns timer rdpacket holding [ seconds ]
undo clns timer rdpacket holding
Parameters seconds
Holding time (in seconds) of the information a RD
packet carries. Valid values are 1 to 65535.
If not specified, the default is 180 seconds.
Example Set the holding time of the information the transmitted RD packets carry to 60
seconds.
<3Com > system-view
System View: return to User View with Ctrl+Z.
[3Com ]clns timer rdpacket holding 60
View This command can be used in the following views:
■ System view