Command Reference Guide

12 ● clns rdpacket enable 3Com Router 5000 Family and Router 6000 Family
Command Reference
clns rdpacket enable
Purpose Use the clns rdpacket enable command to enable the router to send RD
packets.
Use the undo clns rdpacket enable command to disable the router to send
RD packets.
Syntax clns rdpacket enable
undo clns rdpacket enable
Parameters None
Example Enable a router to send RD packets.
<3Com > system-view
System View: return to User View with Ctrl+Z.
[3Com ] clns rdpacket enable
The request redirection is already enabled
View This command can be used in the following views:
■ System view
Description A router sends RD packets by default.
Note:
■ A router sends RD packets regardless of whether or not the router has ES-IS
protocol employed.
■ A router sends RD packets when the outbound and inbound interfaces of its NPDU
are the same.