Command Reference Guide

3Com Router 5000 Family and Router 6000 Family clns es-peer ● 11
Command Reference
clns es-peer
Purpose Use the clns es-peer command to configure a static neighboring ES.
Use the undo clns es-peer command to remove a specified neighboring ES.
Syntax clns es-peer NSAP interface-type interface-number [ SNPA ]
undo clns es-peer { NSAP [ interface-type interface-number ] | all }
Parameters NSAP
Address of the static neighboring ES in the format of
##.####. ... .##. The address may be 8 to 20 bytes in
length.
interface-type
interface-number
Type and number of the interface to which the ES is
connected. The
interface-type argument can be
ATM, Ethernet, NULL, Serial, Tunnel, MFR, MP-group,
Virtual-Template, and Loopback.
SNPA
Layer 2 address of the ES in the format of
####.####.####. Only available for Ethernet
interfaces. A Layer 2 address can be 8 to 20 bytes in
length.
all
Specifies to remove all configured static neighboring
ESs. This keyword is only for the undo command.
Example Configure a static neighboring ES.
<3Com > system-view
System View: return to User View with Ctrl+Z.
[3Com ] clns es-peer 49.0001.0000.6500.00 Ethernet0/0/0 00e0.fc00.1a01
View This command can be used in the following views:
■ System view