Command Reference Guide

10 ● clns erpacket interval 3Com Router 5000 Family and Router 6000 Family
Command Reference
clns erpacket interval
Purpose Use the clns erpacket interval command to set the minimum interval to
generate two successive error report packets.
Use the undo clns erpacket interval command to restore to the default
minimum interval to generate two successive error report packets.
Syntax clns erpacket interval [ integer ]
undo clns erpacket interval
Parameters integer
Integer that specifies the minimum interval (in
milliseconds) to generate two successive error report
packets. Valid values for this argument range from 0 to
4294967295.
Default The default minimum interval to generate two successive error report packets is 10
milliseconds.
Example Set the minimum interval to generate two successive error report packets to 200
milliseconds.
<3Com > system-view
System View: return to User View with Ctrl+Z.
[3Com ] clns erpacket interval 200
View This command can be used in the following views:
■ System view