Command Reference Guide

6 ● bridge-set (in Ethernet Interface view) 3Com Router 5000 Family and Router 6000 Family
Command Reference
bridge-set (in Ethernet Interface view)
Purpose Use the bridge-set (in the Ethernet Interface view) command to
add the Ethernet interface into the bridge.
Use the
undo bridge-set (in the Ethernet Interface view)
command to delete the interface from the DLSw bridge group.
Syntax bridge-set bridge-set-number
undo bridge-set bridge-set-number
Parameters bridge-set-number
The bridge group number that the Ethernet interface is
added into, ranging from 1 to 63.
Default By default, no Ethernet interface is added into the bridge group.
Example Add the Ethernet1/0/0 interface into the DLSw bridge group numbered 20.
[3Com ] dlsw bridge-group 20
[3Com ] interface Ethernet1/0/0
[3Com -Ethernet1/0/0] bridge-set 20
View This command can be used in the following views:
■ Ethernet Interface view
Description After an Ethernet interface is added into the bridge group, the LLC2 packets on the
Ethernet interface can be sent to the remote peer through the related TCP tunnel.