Command Reference Guide

3Com Router 5000 Family and Router 6000 Family open ● 253
Command Reference
open
Purpose Use the open command to set up control connection to the remote FTP server.
Syntax open ipaddr [ port ] [-a ip-address]
Parameters ipaddr
IP address of the remote FTP server.
port
Port number of the remote FTP server.
-a ip-address
Source address of the FTP client.
Example Set up FTP connection to the FTP server on the host 10.110.3.1.
[ftp] open 10.110.3.1
View This command can be used in the following views:
■ FTP Client view