Command Reference Guide

3Com Router 5000 Family and Router 6000 Family voip h323-descriptor ● 323
Command Reference
voip h323-descriptor
Purpose Use the voip h323-descriptor command to configure the description character
string of the voice gateway H.323.
Syntax voip h323-descriptor descriptor
undo voip h323-descriptor
Parameters descriptor
The description character string of H.323, in the length
of 1 to 64. By default, the descriptor is "Vrp
Gateway".
Example Configure the descriptor of H.323 as “mystring”.
[3Com -voice] voip h323-descriptor mystring
View This command can be used in the following views:
■ Voice view
Description It is recommended to configure with default value, also you can configure according
to the actual requirements. If both ends are the device based on VRP, and the
attribute is configured at both ends (i.e., the default value is not adopted), the
character strings of both ends must be the same.