Command Reference Guide

322 ● voip h323-conf tcs-t38 3Com Router 5000 Family and Router 6000 Family
Command Reference
voip h323-conf tcs-t38
Purpose Use the voip h323-conf tcs-t38 command to enable the voice gateway to
include the T.38 capability description in its capability set when it is in H.323
slow-start mode.
Use the undo voip h323-conf tcs-t38 command to disable the voice gateway
to include the T.38 capability description in its capability set when it is in H.323
slow-start mode.
Syntax voip h323-conf tcs-t38
undo voip h323-conf tcs-t38
Parameters None
Default By default, T.38 description is included.
Example Disable the voice gateway to carry T.38 capacity description in its capacity set when it
is in H.323 slow-start mode.
[Router-voice] undo voip h323-conf tcs-t38
View This command can be used in the following views:
■ Voice view
Description As NetMeeting does not support T.38 capability description parsing, you must disable
the voice gateway in H.323 slow-start mode to include the T.38 capability description
in its capability set in order to work with NetMeeting.
As this command is globally effective, the configuration of its undo form can disable all
the voice entities to carry the T.38 capability description in their capability sets. If
interoperability with NetMeeting is required only by a voice entity, you can disable fax
using the
fax baudrate disable command or set the fax mode to a non-T.38
mode,
pcm, or nonstandard for example.